Driver fatigue monitor with signal output 45km/h start-up speed
Description
Monitor levels of driver fatigue. This enables appropriate alerts and driver assistance that help correct dangerous driving. An audio alert or head unit display instructs the driver to remain engaged; the seat belt or steering wheel vibrates to jolt the driver to attention. Climate control lowers the temperature; radio volume increases and plays lively music. A recommendation is made to pull over to get a coffee or take a break.
I/O and RS232 output optional:
I/O output is only a high/low voltage output, you can get only the alarm signal,the connection is easy. The default setting is high resistance status under normal status, low voltage output when triggered.
RS232 output has alarm signal and picture output, thus you can get the driver's face picture in the center, it need to integrate to the GPS system via protocol.
Power input and output
| Input | 9-36V |
| power consumption | 100mA in 12V car, and 60mA in 24V car |
| I/O output | high resistance status under normal status, low voltage output when triggered |
| Working Temprature: | 0-80℃ |
| Working Humility: | 10%-90% |
| Weigh: | 108g |
| Demension: | 4.5*10.2cm |
1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
6. Weigh:108g
7. Demension: 4.5*10.2cm
Product Tags:
|
|
Drowsy Driver Detect Anti Sleep System / Driver Fatigue Sensor With Signal Output Images
|
